Category Archives: Architecture

Footnote Famous

Thought you’d want to know that my article on Garrott, Schindler and the Bethlehem Baptist Church was mentioned in the new book “Building Art: The Life and Work of Frank Gehry”1 written by Paul Goldberger. It’s right there in the footnote at the bottom of page 128.
Building Art pg 128 2015-10-6

OOPS!!

Unfortunately, there are a few errors in the footnote…

Building Art pg 128 footnote 2015-10-6Mr. Goldberger says the Church was “thoroughy restored in 2014”. In fact, the Church has not been restored at all. The current owners have painted the Church in non-original colors and made a few rough patches. The Church is still waiting for restoration by sympathetic owners.

Careful readers may also notice that my last name is spelled wrong. The correct spelling is “Wallet”, one “t”.

I contacted Mr Goldberger and he kindly apologized and assured me that both would be corrected in the next edition.

Thanks to architect and friend Steve Dalton for bringing the footnote to my attention.

1 Paul Goldberger, Building Art: The Life and Work of Frank Gehry (New York, Knopf, 2015), 128

3D Printing, part 2, Irving J Gill blocks

Gill Cossitt cottages 1910 2015-6-17Playing with blockssteve wallet architect Gill blocks Cossitt blocks aerial 2015-6-17

steve wallet architect gill blocks above 2016-6-17I have long admired the Cossitt Cottages, a row of 4 simple houses built by San Diego’s first modern architect, Irving J Gill, in 1910 (first image). They are essentially the same cube house repeated 4 times (second image). A kit of parts consisting of arches, garden walls, and a small roof, is applied to each house in a different way. As the houses step back from the street they get another arch. Each house is a little different and feels unique. This is a very simple but powerful way of differentiating similar houses without resorting to applied surface decoration.steve wallet architect gill blocks close-up 2016-6-17steve wallet architect gill blocks in box 2016-6-17

I combined my interest in the Cottages with 3D printing to make a set of Gill/Cossitt Cottages building blocks (third image). The blocks let you “build” each of the 4 cottages (fourth image) and illustrate the “kit of parts” approach (fifth image). I made a prototype set of the blocks and the instructions/history page, all fitting in a clear plastic box. When folded in the box, the instruction sheet becomes the label for the set .

This set is one of the initial projects I have undertaken with the Irving J Gill Foundation. We hope to have it available soon.

3D Printing, part 1

steve wallet architect 3D print tile 2015-7-19Recently I have been looking into and learning about 3D printing. It allows me to convert my digital models into 3D models. This is done using a 3D printer, which is a cross between a laser jet printer and a hot glue gun. The model is “printed” in layers of melted plastic. The layers cool and stick together and voila! you have a 3D model.steve wallet architect 3D print schindler mcalmon front lft 2016-6-17

steve wallet architect 3D print schindler mcalmon front rt 2016-6-17When you 3D print buildings from a digital model you need to scale down the model. Your 40′ long wall is translated into a 2″ long plane.This requires interpretation of the design and modification of the model. Thin parts of the actual building get too thin when printed in a scaled-down model.These thin parts need to be thickened, adjusting the model for the limits of the printer while keeping the overall sense of the design. These models are roughly 2″ to 4″ on each side.steve wallet architect 3D print schindler mcalmon top 2016-6-17

Print 1: tile (top image)

I thought it would be easiest to print something that was in flat layers. I chose a tile designed by my friend and architect James B. Guthrie. It is meant to be made from stacked layers of computer cut steel and is inspired by the designs of the architect Louis Sullivan.

It was fun to do and I learned a lot, but not so easy – all those curves and layers!

Print 2: Schindler’s McAlmon Apartment (lower three images)

Feeling more confident, I wanted to try a 3D print of a building. I chose my favorite test Schindler, his McAlmon Apartment. I focused just on the Schindler designed front. I love the way it turned out.

Stay tuned for part 2, 3D printing architectural building blocks